Русская версия English version   
О журнале
Редакционная коллегия
Правила для авторов
Информация для читателей и авторов
Оглавление текущего номера
Архив
Контакты
Поиск

Отправить статью
 


Том 19   Выпуск 1   Год 2024
Список литературы

  1. Kazemi M., Fini E.H. State of the art in the application of functionalized waste polymers in the built environment. Resources, Conservation and Recycling. 2022;177:105967. doi: 10.1016/j.resconrec.2021.105967
  2. Hasseb A.A., Abdel Ghani N.D.T., Shehab O.R., El Nashar R.M. Application of molecularly imprinted polymers for electrochemical detection of some important biomedical markers and pathogens. Current Opinion in Electrochemistry. 2022;31:100848. doi: 10.1016/j.coelec.2021.100848
  3. Gbadamosi A., Patil S., Kamal M.S., Adewunmi A.A., Yusuff A.S., Agi A., Oseh J. Application of polymers for chemical enhanced oil recovery: a review. Polymers. 2022;14(7). doi: 10.3390/polym14071433
  4. Cao X., Ye Z., Li X., Xu Y.-J., Liu Y. Synthesis and application of magnetic surface molecularly imprinted polymers in selective solid-phase extraction of epoxy triglyceride from deep frying oil. Food Control. 2022;137:108896. doi: 10.1016/j.foodcont.2022.108896
  5. Isaev E.A., Doronin F.A., Evdokimov A.G., Pervukhin D.V., Rudyak Yu.V., Rytikov G.O., Kornilov V.V., Nazarov V.G. Quantitative Assessment of the Development of Micromycete Colony on the Surfaces of Polymers and Polymer Composites. Mathematical Biology and Bioinformatics. 2021;16(2):367–379. doi: 10.17537/2021.16.367
  6. Po R., Bernardi A., Calabrese A., Carbonera C., Corso G., Pellegrino A. From Lab to Fab: how must the polymer solar cell materials design change? – An industrial perspective. Energy & Environmental Science. 2014;7(3):925–943. doi: 10.1039/c3ee43460e
  7. Pravada E.S., Lyusova L.R., Karpova S.G., Antman E.I., Kotova S.V. Effect of Structural and Dynamic Parameters on the Adhesive Properties of 3,4-Polyisoprene. Kauchuk i Rezina. 2022;81(4):190–193 (in Russ.).
  8. Tan L., Tan B. Hypercrosslinked porous polymer materials: design, synthesis, and applications. Chemical Society Reviews. 2017;46(11):3322–3356. doi: 10.1039/C6CS00851H
  9. Korolev E.V., Smirnov V.A., Al'bakasov A.I., Inozemtsev A.S. Nanotechnologies in Construction: A Scientific Internet-Journal. 2011;3(6):32–43 (in Russ.).
  10. Lesovik V.S., Zagorodniuk L.Kh., Chulkova I.L., Tolstoi A.D., Volodchenko A.A. Stroitel'nye Materialy. (Construction Materials). 2015(9):18–22 (in Russ.).
  11. Grechnikov F.V., Aryshenskii V.Iu., Erisov Ia.A. Izvestia of Samara Scientific Center of the Russian Academy of Sciences. 2018;20(4-1):5–12 (in Russ.).
  12. Babeshko V.A., Evdokimova O.V., Babeshko O.M., Ryadchikov I.V. A method for the design of inhomogeneous materials and block structures. Doklady Physics. 2018;63(10):402–406. doi: 10.1134/S1028335818100014
  13. Trofimov D.A., Shalgunov S.I., Simonov-Emelyanov I.D. Study of the physical and mechanical characteristics of modified epoxy matrices and reinforced plastics using modern computer systems for calculations. Plasticheskie Massy. 2023(1–2):39–41 (in Russ.). doi: 10.35164/0554-2901-2023-1-2-39-41
  14. Tarnavskii G.A., Anishchik V.S., NanoMod toolkit for the computer-aided design of nanostructured semiconductor materials. Num. Meth. Prog. 2009;10(1):34–50 (in Russ.).
  15. Bobryshev A.N., Zharin D.E., Shafigullin L.N., Goumerov M.I. Cad system for designing of specially purposed polymer-based filled composite materials. Forging and Stamping Production. Material Working by Pressure. 2009;8:9–16 (in Russ.).
  16. Shevelev V.V. Prediction of durability of a fiber bundle under uniaxial tension on the basis of the thermal fluctuation model of their brittle destruction. J. Appl. Mech. Tech. Phys. 2023;64(5):902–910. doi: 10.1134/S002189442305019X
  17. Kartashov E.M. Generalized model representations of the theory thermal shock. Matem. Mod. 2023;35(8):14–30 (in Russ.). doi: 10.20948/mm-2023-08-02
  18. Brekhova K.A., Simonov-Emel'yanov I.D., Pykhtin A.A. Projection of structure and compositions of resistance to burning polymer composite materials with flame retardants based on magnesium hydroxide. Tonkie Khimicheskie Tekhnologii (Fine Chemical Technologies). 2023;18(2):109–122 (in Russ.). doi: 10.32362/2410-6593-2023-18-2-109-122
  19. Dementyeva A.G., Kovriga V.V. Influence of a protective diffusion gas flow on the properties of polyethylene gas pipelines. Plasticheskie Massy. 2023;1–2:47 (in Russ.). doi: 10.35164/0554-2901-2023-1-2-47-47
  20. Deshevaya E.A., Gusarov M.V., Tverskoy V.А. Morphology and antimicrobial properties of the compositions of polyvinyl butyral and ethylene propylene rubber with aromatic alcohols. Aerospace and Environmental Medicine. 2022;56(3):54–60 (in Russ.). doi: 10.21687/0233-528X-2022-56-3-54-60
  21. Polunin S.V., Gorbunova I.Iu., Kerber M.L., Kriuchkov I.A., Morozova P.A., Kravchenko T.P. Effect of cord polysulfone on viscoelastic properties of epoxy polymers. Entsiklopedicheskii spravochnik (All materials. Encyclopaedic reference manual). 2023(2):38–41(in Russ.). doi: 10.31044/1994-6260-2023-0-2-38-41
  22. Bhushan B. Biomimetics inspired surfaces for drag reduction and oleophobicity/philicity. Beilstein Journal of Nanotechnology. 2011;2(1):66–84. doi: 10.3762/bjnano.2.9
  23. Bixler G.D., Bhushan B. Fluid drag reduction and efficient self-cleaning with rice leaf and butterfly wing bioinspired surfaces. Nanoscale. 2013;5(17):7685–7710. doi: 10.1039/c3nr01710a
  24. Isaev E.A., Pervukhin D.V., Kornilov V.V., Tarasov P.A., Grigoriev A.A., Rudyak Y.V., Rytikov G.O., Nazarov V.G. Platelet Adhesion Quantification to Fluorinated Polyethylene from the Structural Caracteristics of Its Surface. Mathematical Biology and Bioinformatics. 2019;14(2):20–429. doi: 10.17537/2019.14.420
  25. Bixler G.D., Bhushan B. Bioinspired rice leaf and butterfly wing surface structures combining shark skin and lotus effects. Soft Matter. 2012;8(44):11271–11284. doi: 10.1039/c2sm26655e
  26. Damodaran V.B., Murthy S.N. Bio-inspired strategies for designing antifouling biomaterials. Biomaterials Research. 2016;20(1):18. doi: 10.1186/s40824-016-0064-4
  27. Jaggessar A., Shahali H., Yarlagadda P.K.D.V., Mathew A. Bio-mimicking nano and micro-structured surface fabrication for antibacterial properties in medical implants. Journal of Nanobiotechnology. 2017;15(1):64. doi: 10.1186/s12951-017-0306-1
  28. Li B., Pang Y.-J., Cheng Y.-X., Zhu X.-M. Collaborative optimization for ring-stiffened composite pressure hull of underwater vehicle based on lamination parameters. International Journal of Naval Architecture and Ocean Engineering. 2017;9(4):373–381. doi: 10.1016/j.ijnaoe.2016.09.009
  29. Li Yu., Zhang L., Zhang Ch., Zhang Zh., Liu L. Bioinspired antifouling fe-based amorphous coating via killing-resisting dual surface modifications. Scientific Reports. 2022;12(1):1–10. doi: 10.1038/s41598-021-04746-y
  30. Ferrario J., Caronni S., Occhipinti-Ambrogi A., Marchini A. Role of commercial harbours and recreational marinas in the spread of non-indigenous fouling species. Biofouling. 2017;33(8):651–660. doi: 10.1080/08927014.2017.1351958
  31. Quéré D. Wetting and roughness. Annual Review of Materials Research. 2008;38:71–99. doi: 10.1146/annurev.matsci.38.060407.132434
  32. Serkhacheva N.S., Ryzhikov K.A., Prokopov N.I., Plutalova A.V., Bol’shakova A.V., Chernikova E.V. Seeded raft polymerization of styrene for the synthesis of stable dispersions of amphiphilic block copolymers and composite nanoparticles. Polymer Science, Series B. 2022;64:124–136. doi: 10.1134/S1560090422020087
  33. Zuev A.A., Lyusova L.R., Kovaleva L.A., Boreiko N.P. The influence of filler on the properties of resin–metal compounds. Polymer Science, Series D. 2022;15(2):260–263. doi: 10.1134/S1995421222020344
  34. Li S., Zhang S.-Q., Shen L., Liu Q., Ma J.-B., Lv W., He Y.-B., Yang Q.-H. Progress and perspective of ceramic/polymer composite solid electrolytes for lithium batteries. Advanced Science. 2020;7(5):1903088. doi: 10.1002/advs.201903088
  35. Seuyep N.D.H., Szopinski D., Luinstra G.A., Theato P. Post-polymerization modification of reactive polymers derived from vinylcyclopropane: a poly(vinylcyclopropane) derivative with physical gelation and ucst behaviour in ethanol-water mixtures. Polymer Chemistry. 2014;5(19):5823–5828. doi: 10.1039/C4PY00740A
  36. Wang B., Wang X., Zheng H., Lam Y.C. Surface wettability modification of cyclic olefin polymer by direct femtosecond laser irradiation. Nanomaterials. 2015;5(3):1442–1453. doi: 10.3390/nano5031442
  37. 37 Liu X., Yang G., Lipik V. Permanent water repellent chemical modification of cotton fabric with reagents containing aromatic rings. Fibers and Polymers. 2019;20(1):51–56. doi: 10.1007/s12221-019-8743-0
  38. Wang R., Yang Y., Lu Y., Zhang M. A simple modification to improve the immunity of linear electromagnetic actuators against disturbing magnetic field. Journal of Magnetism and Magnetic Materials. 2022;550:169125. doi: 10.1016/j.jmmm.2022.169125
  39. Vasilev A.P., Struchkova T.S., Nikiforov L.A., Okhlopkova A.A., Cho J.H., Grakovich P.N., Shim E.L. Mechanical and tribological properties of polytetrafluoroethylene composites with carbon fiber and layered silicate fillers. Molecules. 2019;24(2):0224. doi: 10.3390/molecules24020224
  40. Klimov V.V., Kolyaganova O.V., Bryuzgin E.V., Navrotsky A.V., Novakov I.A. Effect of the composition of copolymers based on glycidyl methacrylate and fluoroalkyl methacrylates on the free energy and lyophilic properties of the modified surface. Polymers. 2022;14(10):1960. doi: 10.3390/polym14101960
  41. Annabi N., Shirzaei Sani E., Portillo-Lara R., Fares M.M., Rana D., Gifford J.L., Mithieux S.M., Weiss A.S. Engineering a sprayable and elastic hydrogel adhesive with antimicrobial properties for wound healing. Biomaterials. 2017;139:229–243. doi: 10.1016/j.biomaterials.2017.05.011
  42. Yu X., Zhao Y., Feng Y., Hu X., Liu J., Wang X., Wu M., Dong H., Liang Y., Wang W., Tian F. Synthesis and performance characterization of a road coal dust suppressant with excellent consolidation, adhesion, and weather resistance. Colloids and Surfaces A: Physicochemical and Engineering Aspects. 2022;639:128334. doi: 10.1016/j.colsurfa.2022.128334
  43. Barati Darband G., Aliofkhazraei M., Sokhanvar S., Kaboli A., Khorsand S. Science and engineering of superhydrophobic surfaces: review of corrosion resistance, chemical and mechanical stability. Arabian Journal of Chemistry. 2020;13(1):1763–1802. doi: 10.1016/j.arabjc.2018.01.013
  44. Tyagi A., Walia R.S., Murtaza Q., Pandey S.M., Tyagi P.K., Bajaj B. A critical review of diamond like carbon coating for wear resistance applications. International Journal of Refractory Metals and Hard Materials. 2019;78:107–122. doi: 10.1016/j.ijrmhm.2018.09.006
  45. Sivkov D., Mingaleva A., Petrova O., Isaenko S., Bogachuk D., Skandakov R., Sivkov V., Nekipelov S., Ob’edkov A., Kaverin B., Vilkov I., Gusev S. The structure and chemical composition of the cr and fe pyrolytic coatings on the mwcnts’ surface according to nexafs and xps spectroscopy. Nanomaterials. 2020;10(2):374. doi: 10.3390/nano10020374
  46. Shen X.-J., Wen J.-L., Yuan T.-Q., Chen T., Wang H.-M., Sun S., Mei Q., Yue F., Sun R.-C. Structural and morphological transformations of lignin macromolecules during bio-based deep eutectic solvent (des) pretreatment. ACS Sustainable Chemistry and Engineering. 2020;8(5):2130–2137. doi: 10.1021/acssuschemeng.9b05106
  47. Rytikov G.O., Doronin F.A., Evdokimov A.G., Nazarov V.G., Savel’ev M.A. An approach to structural and functional modeling of the surface morphology of materials based on fluorinated polymers. Russian Journal of General Chemistry. 2021;91(12):2667–2672. doi: 10.1134/S1070363221120409
  48. Rytikov G.O., Doronin F.A., Evdokimov A.G., Rudyak Y.V., Nazarov V.G. The effect of morphological surface inhomogeneities on the mycological resistance of polymer films. Protection of Metals and Physical Chemistry of Surfaces. 2021;57(2):422–431. doi: 10.1134/S2070205121020088
  49. Ivanov V.V., Krivolapova O.V., Belova L.O., Kirilin A.D. Plasticheskie Massy. 2013(2):19–24 (in Russ.).
  50. Nazarov V.G., Stolyarov V.P., Kondratov A.P. Surface channel microstructures in polymer films for fluid transport. Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering. Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering (MCM 2015). 2015. Article No. 242.
  51. Pavlova V.V., Sokolova M.D., Fedorova A.F. Influence of the Content and Nature of the Plasticizer on the Properties of Butadiene-Nitrile Rubber. Journal of Siberian Federal University. Engineering & Technologies. 2021;14(2):222–232 (in Russ.). doi: 10.17516/1999-494X-0303
  52. Ol'khov A.A., Karpova S.G., Rogovina S.Z., Zhorina L.A., Kurnosov A.S., Iordanskii A.L. Materialovedenie. 2022(4):35–41 (in Russ.).
  53. Pogodin V.A., Astapov A.N., Eremkina M.S., Babaytsev A.V., Rabinskiy L.N. Investigation of the low-temperature oxidation effect on the structure and mechanical properties of С/С composite. Nanoscience and Technology. 2021;12(3):29–46. doi: 10.1615/NanoSciTechnolIntJ.2021037997
  54. Zhang T., Lan H., Yu Sh., Huang Ch., Du L., Zhang W. High-temperature solid lubricant coating by plasma spraying using metal-metal clad powders. Journal of Thermal Spray Technology. 2017;26(6):1268–1278. doi: 10.1007/s11666-017-0591-0
  55. Guo S., Neoh K.G., Jańczewski D., Zhu X., Quintana R., He T. Surface charge control for zwitterionic polymer brushes: tailoring surface properties to antifouling applications. Journal of Colloid and Interface Science. 2015;452:43–53. doi: 10.1016/j.jcis.2015.04.013
  56. Hoang V.K., Reznichenko S.V., Emelyanov S.V., Doan V.D., Reznichenko D.S. Investigation of the Reinforcing Action of Silicon Dioxide from Vietnamese Rice Hulls in Elastomeric Materials Based on Non-Polar Rubbers. Kauchuk i Rezina. 2022;81(4):178–183 (in Russ.).
  57. Baranov A.V. Flow of viscous reacting fluid through a porous filler in a flat channel. Plasticheskie Massy. 2023(1–2):42–43 (in Russ.). doi: 10.35164/0554-2901-2023-1-2-42-43
  58. Volynskii A.L., Yarysheva L.M., Bagrov D.V., Rukhlya E.G., Yarysheva A.Y., Bakeev N.F., Nazarov V.G., Stolyarov V.P., Tsypysheva S.V. Evaluation of the deformation strength properties of a fluorinated polymer layer on the surface of poly(ethylene terephthalate) films. Doklady Physical Chemistry. 2012;442(1):5–7. doi: 10.1134/S0012501612010034
  59. Sevastyanov V.I., Nemets E.A., Stolyarov V.P., Baranov V.A., Bozhko N.N., Nazarov V.G. Comparative study of surface modification methods of polyethylene films on interaction with blood components. Perspektivnye Materialy. 2010(4):41–48 (in Russ.).
  60. Doronin F., Rytikov G., Evdokimov A., Rudyak Yu., Taranets I. and Nazarov V. The effect of electro-induced multi-gas modification on polymer substrates’ surface structure for additive manufacturing. Processes. 2023;11:774. doi: 10.3390/pr11030774
  61. Doronin F.A., Rudyak Y.V., Rytikov G.O., Evdokimov A.G., Nazarov V.G. 3D-printed planar microfluidic device on oxyfluorinated PET-substrate. Polymer Testing. 2021;99:107209. doi: 10.1016/j.polymertesting.2021.107209
  62. Doronin F., Savelev M., Taranets I., Rudyak Y., Rytikov G., Nazarov V. The variation-rotational anisotropy aproach to the polymer based materials surface morphological heterogeneity. Rossiiskii Khimicheskii Zhurnal (Russian Chemistry Journal). 2021;65(4):8–15 (in Russ.). doi: 10.6060/rcj.2021654.3
  63. Liu S., Sang S., Wang W., Du Y., Wang T., Wang G., Ma J., Wang X. FIB-SEM and X-ray CT characterization of interconnected pores in high-rank coal formed from regional metamorphism. Journal of Petroleum Science and Engineering. 2017;148:21–31. doi: 10.1016/j.petrol.2016.10.006
  64. Markov A.V., Lobanov V.A. Study of the stress state of polycarbonate monolithic sheets using optical-polarization methods. Fine Chemical Technologies. 2022;17(1):65–75 (in Russ.). doi: 10.32362/2410-6593-2022-17-1-65-75
  65. Orekhov A.S., Klechkovskaya V.V., Kononova S.V. Low-voltage scanning electron microscopy of multilayer polymer systems. Crystallography Reports. 2017;62(5):710–715. doi: 10.1134/S1063774517050145
  66. Petrushin V.N., Rudyak Yu.V., Rytikov G.O., Nazarov V.G. The constructing of the bicriterial reliable empirical distributionsof pixels brightness under the sem-images quantitative analysis. Izvestiia vysshikh uchebnykh zavedenii. Problemy poligrafii i izdatel'skogo dela. 2017;5:3–14 (in Russ.).
  67. Evdokimov A.G., Doronin F.A., Savel'ev M.A., Rytikov G.O., Nazarov V.G. In: Tekhnologii i materialy dlia ekstremal'nykh uslovii (prognoznye issledovaniia i innovatsionnye razrabotki): Proceedings of the All-Russian Scientific Conference. Ed. B.F. Miasoedova. Zvenigorod: 2018. P. 216–220 (in Russ.).
  68. Rytikov G.O., Pervoukhin D.V., Nazarov V.G. A new approach to quantitative characterization of the material’s surface morphological heterogeneity. Lecture Notes in Civil Engineering. 2022;210:301–307. doi: 10.1007/978-3-030-90843-0_34
  69. Kopachev E.S., Nozdrachev S.A., Petrushin V.N., Rudiak Iu.V., Rytikov G.O., Nazarov V.G. Physical Mesomechanics. 2015;18(6):98–110 (in Russ.).
  70. Drozdov S.A., Nazarov V.G., Nozdrachev S.A., Rudyak Yu.V., Rytikov G.O. The polymer composites' morphological structure simulation. Nanosystems: Physics, Chemistry, Mathematics. 2017;8(1):137–145. doi: 10.17586/2220-8054-2017-8-1-137-145
  71. Rytikov G.O., Dedov A.V., Rudiak Iu.V., Nazarov V.G. Avtomatizatsiia protsessa analiza SEM izobrazhenii poverkhnostnykh sloev voloknistykh materialov. Izvestiia vysshikh uchebnykh zavedenii. Problemy poligrafii i izdatel'skogo dela. 2017(5):15–24 (in Russ.).
  72. Rytikov G.O., Doronin F.A., Evdokimov A.G., Savel'ev M.A., Nazarov V.G. Approach to structural and functional modeling of the morphological structure of the surface of materials based on fluorinated polymers. Rossiiskii Khimicheskii Zhurnal (Russian Chemistry Journal). 2020;64(3):63–68 (in Russ.).
  73. Rytikov G.O., Doronin F.A., Nagornova I.V., Rudyak Yu.V., Nazarov V.G., Varepo L.G. The automating of the quantitative analysis and characterization of the polymer based films surfaces SEM-images. J. Phys.: Conf. Ser. 2020;1546:012027. doi: 10.1088/1742-6596/1546/1/012027
  74. Gorbatov R.O., Malyshev E.E., Romanov A.D., Karyakin N.N. Total knee arthroplasty using virtual prototyping and additive manufacturing. Modern Technologies in Medicine. 2018;10(3):146–154. doi: 10.17691/stm2018.10.3.18
  75. Sevostyanov P.A., Samoilova T.A., Tikhomirova M.L. Dry and viscous friction, statistical factors, fluctuation-dissipation theorem and features of their manifestations in relaxation of fibrous materials. Fibre Chemistry. 2020;51(6):449–451. doi: 10.1007/s10692-020-10131-8
  76. Bulgarevich S.B., Boyko M.V. Effective activation energies of chemical reactions and viscous flow of liquids depending on pressure in tribosystems with boundary and mixed friction. Journal of Friction and Wear. 2017;38(2):132–137. doi: 10.3103/S1068366617020052
  77. Ngo T.D., Kashani A., Imbalzano G., Nguyen K.T.Q., Hui D. Additive manufacturing (3D-printing): a review of materials, methods, applications and challenges. Composites Part B: Engineering. 2018;143:172–196. doi: 10.1016/j.compositesb.2018.02.012
  78. Lee J., Jang T.-S., Jung H.-D., Lee H., Cheon K.-H., Park C., Kim H.-E. Fabrication of poly(lactic acid)/ti composite scaffolds with enhanced mechanical properties and biocompatibility via fused filament fabrication (FFF)–based 3D printing. Additive Manufacturing. 2019;30:100883. doi: 10.1016/j.addma.2019.100883
  79. Doronin F.A., Rudyak Yu.V., Rytikov G.O., Savelev M.A., Taranets I.P., Nazarov V.G. Influence of fluorination on mycological resistant of polymer materials. Rossiiskii Khimicheskii Zhurnal (Russian Chemistry Journal). 2021;65(4):8–15 (in Russ.). doi: 10.6060/rcj.2021654.3
Содержание
Оригинальная статья
Григорьев А.А., Исаев Е.А., Первухин Д.В., Петрушин В.Н., Доронин Ф.А., Рудяк Ю.В., Рытиков Г.О., Назаров В.Г. Биомиметический подход к созданию полимерных материалов с улучшенными трибологическими свойствами. Математическая биология и биоинформатика. 2024;19(1):1-14. doi: 10.17537/2024.19.1
(опубликована на рус. яз.)

Аннотация (рус.)
Аннотация (англ.)
Полный текст (рус., pdf)
Список литературы

 
  Copyright ИМПБ РАН © 2005-2026